One Year Free Update Thinkdiag2 OBD2 Diagnostic Scanner for iOS & Android, Bluetooth Scan Tool with Bidirectional Control/CAN-FD Protocol/AutoVIN/Active Test

Product Description

THINKCAR Thinkdiag2 OBD2 Diagnostic Scanner for iOS & Android, Bluetooth Scan Tool with Bidirectional Control/CAN-FD Protocol/AutoVIN/Active Test




THINKCAR Thinkdiag2 Highlights:

1. CANFD Protocol: Thinkcar Thinkdiag2 is the only tool in this range that supports CAN FD protocol vehicles(for GM vehicles after 2020), saving on buying adapter and getting stable communication.
2. 120 Car Brands Coverage +10 languages: Thinkdiag2 professional scan tool supports most car models after 1996 year of 120+ car brands. Global version can be used without geographical restrictions.
3. Bidirectional Control/Actuation test: Thinkcar thinkdiag2 car scanner diagnostic tool Features Full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls.Such as: turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior & exterior lights, sound horn, test door lock actuators and such.
4. ECU Coding: For customize your car, unfold the hidden features, or disable the annoying functions(turn off the back up beep, turn the seat belt buzzer off); Re-identify the adaptive data for certain components after repairs or replacements. (NOTE: DO NOT Support ECU reprogramming)
5. 15+ Reset Functions: Along with all the common maintenance functions, such as ABS Bleeding, K*y Programing, Injector Coding, Oil Reset, DPF Reset, BMS Reset etc.
6. Auto Auth for FCA SGW: Thinkcar Thinkdiag2 car canner allows you to unlock the protected FCA vehicle SGW module for Chrysler/for Dodge/for Jeep/for Alfa Romeo/for Fiat vehicles, etc. (NOTE: Only provide AutoAuth login portal, and need purchase the registration number on the AutoAuth website by yourself.)
7. All System Diagnosis: Thinkdiag obd2 scanner supports read all vehicle systems (including ENG, ABS, SRS, ABS, AFS, EBD, TCS, chassis, body and electric and electronic equipment system, etc.) of the error code, cleanup code, read the data flow, the freeze frame. It can also perform all the commands that a mechanic needs, to know the product problem whether caused by car's electrical wiring or car’s component.
8. AutoVin & Auto Scan: Automatically retrieve the vehicle identification number for comprehensive all available systems scan for quick diagnostics.

Tips: Internet connection is recommended when using it. Some functions may not be available or diagnostic result error without connecting network.


Thinkdiag2 is the upgraded version of Thinkdiag car code reader/automotive scanner.

Thinkdiag vs Thinkdiag 2

The most significant difference between thinkdiag and thinkdiag2 is CAN FD protocols. Thinkdiag2 has a built-in CAN FD protocol. It is the only product in this price range that is compatible with CAN-FD protocol and supports the latest GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products, and reduces the risk of undetected errors to enhance the user experience significantly.






Thinkdiag2 Functions:

ECU Coding (Customize)

The ECU coding function is used to reflash the vehicle control module, which allows you to match repaired or replaced components to the ECU. It can activate the hidden functions for VW, for AUDI, for BENZ, and for BMW models.
If you want to confirm whether your model can perform this function, please provide the VIN number or specific vehicle information (year of manufacture/specific model/country of manufacture) and we will confirm for you.


Active Test (Best bidirectional scan tool)

The advantage of Thinkdiag2 is that it supports full bi-directional control capability to send commands to the vehicle's systems/components to verify system inputs/outputs without using the vehicle controller. like Shutter Grill Relay Test, Low-Pressure EGR Actuator Test, High-Pressure EGR Actuator Test, Intake Pressure Control Valve Actuator Test, Low-Pressure EGR System Test, Low-Pressure EGR Differential Pressure Sensor Test, 2 stages turbocharger boost test, VTEC low V/T check, Compression Test, IMT (IMRC) test, VTEC Test, VTEC(VCM) Test.


One-Touch AutoVIN Technology

AutoVIN function supports Thinkdiag2 to automatically identify most car models, year of manufacture, and VIN codes. You can enter the corresponding menu and perform a one-click full vehicle scan and a system-wide vehicle health report will be automatically generated later which the report can be shared.


Add CAN-FD protocol
Fits for more GM cars:

· For Chevrolet Tracker/For Suburban/For Tahoe 2023
· For Chevrolet Onix 1.0L(L4F/L4G/LIJ/LIF)/Onix 1.2L(LIF) 2020-2023
· For Cadillac Escalade/Escalade ESV 2021
· For GMC YUKON/YUKON XL 2021
· For Chevrolet Tracker 2020

                        


Scan Tool to Reprogram Keys

Based on continuous innovation, Thinkdiag 2 perform IMMO functions, such as Key Learning, Remote Control Learning, Remote Control Add, etc. It can perform Programming, accessing the key chips, reading, retrieving, and writing key information, easy key programming, as well as other key-related functions.


4 Data display in 1 Graph

Thinkdiag 2 will Read the vehicle's live data and present it by graph—an optional combination of multiple data.


Print the vehicles report

Support does an OBD vehicles diagnostic report and prints the vehicles report from PC; it helps you understand the car's problem and lets you know how to repair the car.


Full System OE level functions

ThinkDiag 2 Enhanced diagnostic scanner can perform OE-level diagnostics on all systems, such as ABS, SRS, Engine, Transmission, Wiper, Seat, EPB, TPMS, Body System, AWD, Door Lock System, Battery, ESP, Parking Sensor, Cruise Control, Instrument, etc.




ThinkDiag2 Has 14+ Poular Maintenance Reset Function



1. Oil Light Reset: This allows you to recalculate the engine oil life system after an oil change.
2. TPMS Reset: When the car tire pressure fault light is on, after carrying out maintenance, you need to reset the tire pressure through the tire pressure reset function to extinguish the tire pressure fault light.
3. Brake pad reset: When the brake pads and brake pad wear sensing line are replaced, the brake pad indicator lights up, after the brake pad sensor line short circuit is repaired, or after the servo motor is replaced, the reset needs to be done.
4. SAS Calibration: Calibrate the steering angle sensor and clear the fault memory.
5. Battery Reset: It is to use Thinkdiag2 to perform a reset process on the monitoring unit of the car battery, clear the original fault information about the battery being low, make it match again, and let the monitoring unit monitor with the relevant information of the existing battery as the standard.
6. ABS Bleeding: When the ABS system contains air, the brake system needs to be exhausted through the ABS exhaust function to restore the ABS system braking sensitivity. The ABS bleed function is required when replacing the ABS computer, ABS pump, brake master pump, brake sub-pump, brake lines, and brake fluid.
7. ETS Learning: Initializes the throttle actuator to restore the "learning" values stored on the ECU to their default state.
8. DPF regeneration: Generally, DPF regeneration matching is required when the exhaust back pressure sensor is replaced, the particulate trap is removed or replaced, the fuel additive nozzle is removed or replaced, the catalytic oxidizer is removed or replaced, the DPF regeneration fault light is illuminated and matched after repair, and the DPF regeneration control module is repaired and replaced, mainly to remove the trap performance by using combustion oxidation on a regular basis Always maintain the best stability.
9. Injector Coding: usually in the replacement of ECU, the injector nozzle, is required to confirm the code of each cylinder nozzle or re-code. So that the cylinder can better identify each cylinder nozzle, and more accurate control or correction of the amount of fuel injection of each cylinder.
10. Sunroof initialization: This function can set the sunroof locking off, closing when it rains, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
11. EGR Adaption: This function can be used for self-learning after EGR (Exhaust Gas Recirculation) valve cleaning or replacement
12. Suspension Matching: When replacing the body height sensor in the air suspension system, after the control module or when the car is leveled incorrectly, this function needs to be performed to adjust the body height sensor for level calibration.
13. Transmission Learning: When the transmission is disassembled or repaired (after the battery is disconnected in some car models), it will lead to shift delay or shock problem, then this function needs to be performed to make the transmission compensate automatically according to the driving conditions in order to achieve a more comfortable and ideal shift quality.
14. Headlight Matching


Support 10 OBD2 Full Function

This diagnostic software can test vehicle Engine systems—all models with engines meeting SAE J1850, ISO9241-2, ISO14230-4, and ISO15765 Standards in OBD2&EOBD.

1. View freeze frame date
2. Support graph data stream
3. O₂ Sensor test
4. Evap system test
5. On-Board monitor test
6. Read & Clear DTCs
7. Identify VIN information
8. DTC code lookup
9. Turn off MIL(Malfunction Indicator Lights)
10. I/M Readiness status test



The diagnostic scanner has an Auto-VIN function, it can help car owners/repair stores automatically and quickly identify the year of manufacture, model, and VIN of most models, then enter the vehicle diagnostic menu. Then you can click 'Health Report' for a complete vehicle system scan, automatically generating a detailed vehicle health report after diagnosis.

Reports and diagnostic records can be viewed in the REPORT and HISTORY menu, and reports can be shared and printed.


How to Registration Thinkdiag2? 

How to operate ThinkDiag 2 when you get it?

Step 1: Download ThinkDiag App from Google play (android obd2 scanner)/ App store (obd2 scanner bluetooth iphone) 
Step 2: Register & Login
Step 3: Active Thinkdiag 2 ( the serial number is in the back of Thinkdiag 2 , the password is in the white sticker in manual book )
Step 4: Go to download All softwares
Step 5: Connect Thinkdiag 2 to car , go to read the VIN , it will diagnose!




Every Technician Will Love ThinkDiag2
Thinkcar thinkdiag2 is easy to use and an Ideal Choice for: Technician, advanced DIY, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic, DIY beginner, automotive student, backyard mechanic, retired mechanic, weekend DIY, individual.

• Component Matching: For Volkswagen / For SKODA / For Seat / For BMW / For GM / For Ford / For Opel /For Mazda /For Fiat / For Honda / For Nissan / For Hyundai /For KIA /For Subaru etc.
• FCA AutoAuth to unlock SGW in FCA Vehicles: For Chrysler/for Dodge/for Jeep/for Alfa Romeo/for Fiat vehicles, etc.
• Online Coding: For Volkswagen /For Audi /For Benz /For BMW /For Seat /For Porsche etc.
• Online Account Login Service: For Volkswagen /For Audi /For SKODA /For Seat etc.
• Online Calibration: For Volkswagen /For Audi /For SKODA /For Seat etc.
• Online Parameterization:For Volkswagen /For Audi /For SKODA /For Seat etc.
• Guided Functions: For Volkswagen /For Audi /For SKODA /For Seat etc.
• Power Balance: For Chrysler /For GM /For Ford etc.
• Activate the Hidden Functions: For BMW /For Porsche /For Toyota /For Subaru etc.

Thinkdiag2 Parameters:

Model: Thinkdiag2
Product Size: 4.8*2.7*1.1 inches
Operating Voltage: 9V-18V
Working Power: ≤2W
Operating Temperature: 14℉～122℉
Storage Temperature: -4℉～140℉
Number of Connector Pins: 15 PIN
Length of Diagnostic Cable: 23 inches
Bluetooth Version    5.0BLE Bluetooth Dual-mode
Compatible Device    IOS 9.0 and above system & Andriod 5.0 and above system
What's in the package?    Thinkdiag2 Bluetooth Scanner, DB15 three-row to OBD 16pin diagnostic cable, EVA Storage Bag, Multilingual manuals.


Package Includes:

1 pc x Thinkdiag2




   

---

Contact Information:

Email: sales@x431tool.com
Whatsapp: +86  18186426016


Scan x431tool.com QR code to order anywhere and anytime by mobile phone